Replacement, not maintenance
A serviceable element is swapped weeks early because cleaning it properly takes too long. Across a fleet, that is a consumable line item every month.
Pneumatic rotary · factory direct
Clean heavy-duty air filters in seconds.
A compressed-air rotary cleaner for workshops servicing truck, mining, agricultural and construction fleets. Even 360° airflow at up to 6,600 RPM — it lifts dust out of the pleats instead of tearing the media.
6,600RPM max head speed
Ø100–300mm filter bore range
0 VPurely pneumatic drive
12 hQuotation turnaround
The problem
A clogged element costs more than the filter itself.
Every workshop that services heavy machinery knows the routine: the element is dusty, the bay is booked, and there is no fast way to clean it. So it gets replaced early — or cleaned badly.
Downtime on the bay
Manual blowgunning ties up a technician and a bay for the length of the job, and the result depends entirely on who is holding the nozzle.
Damaged media
A blowgun puts full line pressure on a small spot. Paper tears, pleats collapse, and the element ends up in the bin anyway — the worst of both options.
The fix is not more pressure — it is better distribution. The rotary head spreads regulated air over the full 360° of the element, so dust is lifted out of the pleats instead of being driven through them.
Product
Six reasons it stays on the bay.
Built around one job: restoring a cylindrical air filter element so it can go back into service.
01
High-speed rotating airflow
The cleaning head spins to 6,600 RPM, generating a vortex that lifts trapped dust out of the pleats in a single pass.
02
Regulated, visible pressure
A built-in regulator with an analogue gauge lets the operator set pressure for the media in front of them — light for fine paper, higher for heavy-duty elements.
03
Automatic pressure relief
A safety relief valve bleeds excess pressure before it reaches the element, so a supply spike does not become a torn filter.
04
Universal positioning base
The positioning plate adjusts from 100 mm to 300 mm, covering the bore range of standard cylindrical filters on trucks and plant equipment.
05
No electricity
Driven entirely by workshop compressed air. No motor, no wiring, no electrical hazard next to a wet wash bay or a fuel-soaked workshop floor.
06
Industrial consumables
Solid aluminium head, stainless Ø20 × 600 mm operating rod and a Ø305 mm base plate — parts that survive being used, not just demoed.
Operation
Four steps, one technician.
No training program, no electrical connection. If the bay has an air line, it has everything the cleaner needs.
Set the element
Centre the cylindrical filter on the Ø305 mm base plate.
Adjust the arms
Set the positioning plate to the filter bore, anywhere from 100 to 300 mm.
Set the pressure
Connect workshop air and dial in pressure on the regulator — read it off the gauge.
Open the valve
The head rotates and the element is evacuated from the inside out. Hands free.
Applications
Where it pays for itself.
The same machine serves very different fleets. These pages cover the filters, intervals and economics for each one.
Heavy trucks & fleet depots
Fleet workshops pull elements on a schedule. Cleaning on the bay keeps a serviceable filter in the truck instead of on a shelf.
Read the fleet guide →Mining & quarry plant
Silica and rock dust load elements fast. Restoring them in the site workshop cuts consumable spend across the whole fleet.
Read the mining guide →Tractors & harvesters
Harvest is short and dust is constant. Cleaning between shifts keeps the same element in service all season.
Read the agriculture guide →
Technical data
Specifications
Fixed factory dimensions, so a spare element and a spare cleaner always fit each other.
| Product | Pneumatic rotary air filter cleaner |
|---|---|
| Power source | Workshop compressed air |
| Rotational speed | Up to 6,600 RPM |
| Base positioning plate | Ø305 mm · 50 mm thick |
| Positioning range | 100 mm – 300 mm |
| Main operating rod | Stainless steel Ø20 × 600 mm |
| Top protective plate | Ø100 mm disc |
| Hose clamping diameter | 80 mm – 180 mm |
| Pressure control | Regulator + analogue gauge |
| Safety | Automatic overpressure relief valve |
Wholesale
Your brand on the carton.
We supply distributors, machinery parts wholesalers and tool importers. Private label, custom manuals, export packaging and mixed container loads are all normal orders for us — not exceptions.
- ✓ Private label and OEM branding
- ✓ Custom user manuals and export cartons
- ✓ FOB, CIF and door-to-door quotations
- ✓ FCL, LCL and air freight
Sampling
Single units for evaluation, with video inspection before dispatch.
Mixed loads
Combine the cleaner with your existing parts order to fill a container.
Documentation
Commercial invoice, packing list and certificate of origin prepared with every shipment.
Questions
Before you ask.
What air supply does it need?
Any standard workshop compressor line. Pressure is set on the built-in regulator and read from the analogue gauge, so the same unit works on a small service bay and a heavy equipment workshop.
Will it damage a paper element?
Not at a sensible pressure. The head distributes air across the full circumference instead of concentrating it, and the relief valve bleeds supply spikes. Set the regulator to suit the media — the gauge is there so you are not guessing.
Which filter sizes fit?
The positioning plate covers bores from 100 mm to 300 mm, and the hose clamp takes 80–180 mm connections. That range covers the cylindrical elements used on most trucks, excavators, tractors and stationary engines.
Can we order under our own brand?
Yes. Private label, custom manuals and printed export cartons are standard for wholesale orders. Send your artwork and target quantity and we will quote it.
Get a quotation
Tell us what you service. We will quote the right configuration.
Send the filter types or the model numbers you work on, the quantity you have in mind, and the destination country. You get technical details plus an FOB or CIF price within 12 hours.
Request a quote
Fields marked * are required.